Sandblast Glass Beads 320#
Product Function
Glass Beads used as blasting materials are with the features of clearness, hardness and toughness. They are suitable for cleaning and polishing burrs and dirt on various mold surfaces so that the processed articles have a good finish and prolong their service life. Its recyclability makes it an economical choice.The chemical nature of the glass beads is inert and non-toxic, during use, no iron or other harmful substances remain on the surface of the workpiece, nor will it adversely affect the surrounding environment. The roundness of the smooth surface makes it no scratch damage to the mechanical precision of the workpiece during the process of sandblasting. One unique application for glass bead blasting is peening, which helps the metal better resist fatigue and cracking from stress corrosion. One study found that it can increase fatigue strength by about 17.14%. It gives you an attractive satin finish while increasing the durability of the product.
Product Specification
Main products specification for sandblasting according to following table:
| No. | Diameter(um) | Corresponding sieve size |
| 1 | 850-425 | 20-40 |
| 2 | 425-250 | 40-60 |
| 3 | 250-150 | 60-100 |
| 4 | 150-105 | 100-140 |
| 5 | 105-75 | 140-200 |
| 6 | 75-45 | 200-325 |
You can choose different size glass bead between 45um-850um according to different function.
High Strength Glass Beads (for Blasting)
With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing.
Other purposes of the products are as follows:
1. Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion.
2. Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc.
3. Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering
4. Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts
5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair
6. Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts.
High Strength Glass Beads for blasting
| Type | Mesh | Grain Size μ m |
| 30# | 20-40 | 850-425 |
| 40# | 30-40 | 600-425 |
| 60# | 40-60 | 425-300 |
| 80# | 60-100 | 300-150 |
| 100# | 70-140 | 212-106 |
| 120# | 100-140 | 150-106 |
| 150# | 100-200 | 150-75 |
| 180# | 140-200 | 106-75 |
| 220# | 140-270 | 106-53 |
| 280# | 200-325 | 75-45 |
Certificate
Packing
According to clients' requirement.
