China Abrasive Glass Beads AMS 2431/6C AGB-10 Manufacture and Factory

Abrasive Glass Beads AMS 2431/6C AGB-10

short description:

The excellent properties of the glass beads make it suitable for use in cleaning or deburring workpieces with strict deviations without damaging the surface of the workpiece. Moreover, the inherent strength of the glass beads makes it suitable for use in equipment capable of circulating abrasives.
Glass beads are widely used to treat workpiece surfaces with residual tension or under cyclic pressure to produce compressive stress layers for surface strengthening purposes. Use glass beads to strengthen the surface of the workpiece, reducing potential hazards such as surface erosion or surface fatigue.

Send email to us

Product Detail

Product Tags

Advantage

1.Surface treatment with glass beads is very economical and accurate.

2.The chemical nature of the glass beads is inert and non-toxic. During use, no iron or other harmful substances remain on the surface of the workpiece, nor will it adversely affect the surrounding environment.

3.With rich producing experience, the glass beads quality can control by adjusting the furnace temperature, the induced draft fan, and cooling water, so our product roundness is very high, and the glass beads appearance is clear without bubble

4.We worked with the glass factory, and choose the best raw material, it will give a promise on quality from resources.

5.We have 24 hours quality control system, to make sure each lot of glass beads quality is the same

6.Factory advantage, we can give the best competitive price

Physical Indicators

1. Rounding rate: industrial shot peening beads ≥ 90%

2. Refractive index: ≥ 1.5

3. Hardness: Mohs 6-8

4. The main ingredients: sodium-calcium glass composition

5. Appearance: round, transparent, no obvious bubbles and impurities

6. Particle size between 45um and 1000um

7. Softening point: 710-730 °C

8. Density: 2.4-2.6g/cm3

Application

1. Rust removal inside and outside of various types of parts, in addition to oxides, polishing to rough, Clearing stress

2. Surface treatment of various jewelry watches, lamps, cosmetic bottles, and eyeglass accessories.

3. It can remove the tensile stress of various types of parts, increase fatigue life and improve the resistance to stress and corrosion. Such as aircraft engine turbines, blades, shafts, landing gear, various springs, gear hydraulics, etc.

4. The integrated circuit board, plastic sealing on the tube before the tin cleaning and removal of waste edge burrs.

5. Remove the blockage in the cylinder and piston.

6. Shot peening and finishing of medical equipment, textile machinery, food machinery, and various hardware products.

7. Cleaning of components such as coils and brush rotors during motor overhaul.

8. Cleaning of various metal tubes and non-ferrous metal precision castings and removal of burr residue.

9. All kinds of parts inside and outside the rust, deoxidation, polishing to thicken, remove stress.

10. Polishing of all kinds of jewelry, watches, lamps, cosmetics, glasses accessories.

Previous: Glass Bead Abrasive For Surface Preparation AMS 2431/6C AGB-9

Next: Metal Finishing Glass Beads AMS 2431/6C AGB-12

AMS 2431/6C